▲

搜建筑

” 关注即可

墨尔本南岸的新Adina公寓酒店是澳大利亚第一家交叉层压木（CLT）高层酒店。该项目采用了最新的木材建筑技术，在可持续设计方面达到了新的水平。约5,300吨CLT被用于在现有商业建筑的基础上增加10层，抵消了近4,200吨大气中的二氧化碳。

CLT进一步推动城市适应性再利用 这座建于1989年的商业办公大楼，通过使用混凝土框架结构，可以扩建6层。Bates Smart面临的设计挑战是如何超越这个极限，以提供一个拥有220间客房的酒店。

The new Adina Apartment Hotel Melbourne Southbank is the first cross-laminated timber (CLT) high-rise hotel in Australia. Utilising the latest in timber construction technology this project attains new levels in sustainable design. Approximately 5,300 tonnes of CLT were used to add 10 levels to an existing commercial building, offsetting nearly 4,200 of CO2 from the atmosphere. CLT Pushes Urban Adaptive Reuse Even Further The existing commercial office building built in 1989, was able to accommodate an extension of six levels with the use of concrete framed construction. The design challenge Bates Smart faced was how to surpass this, in order to deliver a hotel with 220 rooms.

该解决方案涉及使用交叉层压木材（CLT）结构，这意味着现有建筑能够支持额外的10层，从而实现了13,000平方米的新楼面的目标房间数量。CLT的重量约为混凝土的20%，基本上将现有结构上的层数增加了一倍。

使用CLT还可以在场外预制构件，从而提高了施工效率，减少了对周围建筑的影响。CLT提供了一个更可持续的方法来增加城市的密度。在有限的可开发用地供应下，轻质木结构可以提高产量，而使用传统的混凝土和钢结构是无法实现的。

The solution involved the use of Cross Laminated Timber (CLT) construction which means the existing building is able to support an additional 10 levels, thereby achieving the target room number spread across 13,000 square metres of new floorspace. CLT is approximately 20% the weight of concrete, essentially doubling the number of levels that could be built above the existing structure. Using CLT also allowed for components to be prefabricated off-site, resulting in increased construction efficiencies and decreased impact on surrounding buildings. CLT presents a more sustainable approach to increasing density within our cities. With a limited supply of developable sites, lightweight timber structures can increase yields, which would not be achievable using traditional concrete and steel construction.