分享
微信扫一扫
收藏
下载
登录查看完整案例
剩余88%未读,登录后即可浏览
用FRP画一只建筑毛毛虫丨中国深圳丨深圳大学建筑与城市规划学院,深圳大学本原设计研究中心
浏览79
发布时间:2023-04-28
设计亮点
模块化设计、空间利用、互动光影、连接规则创新。
1. 模块化装置——茂密城市
Module Installation — Dense City
由深圳大学本原设计研究中心团队创作的永久装置《茂密城市》亮相光明区城市规划展览馆建筑艺术计划“光明城市”。
深圳光明区建筑艺术计划在深圳市规划和自然资源局光明管理局的指导下,由上海风语筑文化科技股份有限公司发起,邀请建筑师、艺术家创作关于城市思考的作品,用艺术装置的形式多角度呈现城市面貌。
The permanent installation “Dense City” created by the team of Benyuan Design Research Center, Shenzhen University, appeared in the architectural art project “The Radiant City” in Guangming Urban Planning Exhibition Hall. Under the guidance of Guangming Administration of Shenzhen Municipal Bureau of Planning and Natural Resources and initiated by Shanghai Fengyuzhu Culture Technology Co., LTD., Shenzhen Guangming District Architectural Art Project invites architects and artists to create works of thinking about the city, presenting the urban landscape in the form of art installations from multiple perspectives.
▼项目概览
overall of the project
收藏此图
下载原图
用FRP画一只建筑毛毛虫丨中国深圳丨深圳大学建筑与城市规划学院,深圳大学本原设计研究中心-7
一把长椅,一面展墙。装置作品《茂密城市》所处的位置是深圳光明区城市规划展览馆二层扶梯过厅处,过厅与一侧卫生间相连,于是设计的原点是一把公共长椅,提供观展游客休憩等待的场所。同时,作品一侧落地窗西晒严重,设计团队设想长椅的靠背高耸至天花板,虚虚实实,可遮挡阳光的同时与之互动,形成一面有趣的光影展墙。
A bench, an exhibition wall. The installation “Dense City” is located at the escalator crossing hall on the second floor of the Exhibition Hall. The crossing hall is connected to the restrooms on one side. Therefore, the origin of the design is a public bench, which provides a place for visitors to rest and wait. Meanwhile, the floor-to-ceiling window on one side of the work is exposed to the west sun. The design team envisaged that the back of the bench will rise to the ceiling, which can block the sun and interact with sunlight at the same time, forming an interesting light wall.
▼装置近景,close view of installation
收藏此图
下载原图
用FRP画一只建筑毛毛虫丨中国深圳丨深圳大学建筑与城市规划学院,深圳大学本原设计研究中心-11
下载原图
用FRP画一只建筑毛毛虫丨中国深圳丨深圳大学建筑与城市规划学院,深圳大学本原设计研究中心-12
装置由 360 个标准化单元集群产生,单元是 15cm 见方的盒子,由 1.5mm 厚度冷轧板制成。设计的重心一方面在于对单元内弧面形式的处理,基于简单的几何逻辑,柔和了铁盒子硬朗的表面,也产生一些 1/4 圆形开口增强通透性。
The installation is generated from a cluster of 360 standardized units, which are 15cm cubes made of 1.5mm thick cold-rolled sheet. On the one hand, the focus of the design is to deal with the form of curved surface of the unit. Based on simple geometric logic, the iron surface is softened and some 1/4 round openings are generated to enhance the permeability.
▼概念分析,concept
下载原图
用FRP画一只建筑毛毛虫丨中国深圳丨深圳大学建筑与城市规划学院,深圳大学本原设计研究中心-16
没有更多了

作品0

浏览0

关注0

相关推荐
南京喵熊网络科技有限公司 苏ICP备18050492号-4知末 © 2018—2020 . All photos and trademark graphics are copyrighted by their owners.增值电信业务经营许可证(ICP)苏B2-20201444苏公网安备 32011302321234号
搜索
搜索历史清空
暂无历史记录~